Previously, I have featured Yamaha LC135 Racing Engine Block 58.5mm. Now, it is the time for more power, 60mm!
I would say fitting this part to your LC135 is extreme modification. This is due to the fact that standard size of LC135 block is 54mm, FZ-150i is 57mm but this one is at 60mm!
Theoritically, you’ll have a bike that is more than 150cc by using this parts. Expect power gain and good torque. One word of advice, let the block run-in first before you do hit it on the road or track.
I would say fitting this part to your LC135 is extreme modification. This is due to the fact that standard size of LC135 block is 54mm, FZ-150i is 57mm but this one is at 60mm!
Theoritically, you’ll have a bike that is more than 150cc by using this parts. Expect power gain and good torque. One word of advice, let the block run-in first before you do hit it on the road or track.
Advertisements
[wp_dfp_ad slot="mm_lb_03"]
Please email me at mohdwahidi[at]motomalaya.net if you want to order this part.
How can order this and how much ?
if you increase piston size by 1mm, you also need to increase the size of main jet by one size(eg: standard=100 > increase to 101).
do we need to tune the carb..
how much that set of cylinder block pm me @ [email protected]
sir magkano po yung ganyang piston at block paki email naman ako [email protected] salamat poh
sir magkano po yung ganyang piston at block paki email naman ako [email protected] salamat poh
cylinder block, piston, rings, all parts is about 400, installation is up to you, engine oil, spark plug replace with iridium, then your motorbike will run like roket.
ho much al of this cost??
This item is found at SCK Motor Shah Alam. For Malacca availability, please do your research and share here if you like.
Yes, it is plug and ride! No modification needed whatsoever except for the gasket replacement.
wow..
which location sell this product?
at melaka got?
install tis block no need to modify certain parts rite? juz plug n play?
Melaka LC Community